My Italy

Utilizza questo forum per mostrare le tue elaborazioni di modelli ferroviari.
 
Avatar utente
Andrea Morandi
Manovratore
Manovratore
Messaggi: 305
Iscritto il: venerdì 23 dicembre 2005, 20:53
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Località: Venegono Sup. (VA)

Re: My Italy

Messaggio da Andrea Morandi »

Beautiful job.
I signed up, too.

Andrea
"Meno le persone sanno di come vengono fatte le salsicce e le leggi e meglio dormono la notte"
O. Von Bismarck (1815-1898)
Avatar utente
E656BB
Assistente di Stazione
Assistente di Stazione
Messaggi: 1625
Iscritto il: giovedì 11 maggio 2006, 23:55
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Epoche di interesse: IV
Località: Torino
Contatta:

Re: My Italy

Messaggio da E656BB »

Hi Viktor.
very amazing! :shock:
I saw the servo switchs are faraway from the turnouts (about at 4' 30"), how do they work? could you please make us show the operation of them by pictures or video?
thank you so much.
Viktor
Ausiliario di Stazione
Ausiliario di Stazione
Messaggi: 20
Iscritto il: venerdì 17 luglio 2020, 17:01
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Epoche di interesse: IV

Re: My Italy

Messaggio da Viktor »

Hi all,

please let me wish you and your family a great year 2021!

@ E656BB
I saw the servo switchs are faraway from the turnouts (about at 4' 30"), how do they work? could you please make us show the operation of them by pictures or video?
thank you so much.
I don't like to have the actuators unter the board as I feel very uncomfortable whike assembling. So I decided to put it next to the track, so that I can do the assembly from above. Of course, later on when the scenery is done and a actuator will fail, I have to destroy the scenery, but again all from above. In 10 years I will report my experiences ... :mrgreen:
Here some pictures...

Immagine

Do you know original FS track-switches in 1:87? I imagine that I alredy did see those, but I can't remenber the supplier...

Immagine

For a better acoustic, I glued the actuator on some foam. Now you hear really nothing!

Immagine

And now I want you to show my newes clip of some trains between Imperia and Mauricio. I know that the trains don't really fit together, honestly spoken I took what I coud get ... next time I'll try hard :wink:

https://youtu.be/ncyO2SV3dig

Ciao
Viktor
Avatar utente
Maurizio Melis
Manovratore
Manovratore
Messaggi: 499
Iscritto il: giovedì 1 ottobre 2009, 15:26
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Epoche di interesse: 4
Località: Roma (serafico)

Re: My Italy

Messaggio da Maurizio Melis »

Hi Viktor,
great start, keep going.
I also use the tillig tracks and points, for the visible one, you can look for the casting of the italian electric point motors.
Will make some pictures in the next days if someone does not post earlier.
Where are you in Germany? I live close to KL.
Ciao
Maurizio Melis
Viktor
Ausiliario di Stazione
Ausiliario di Stazione
Messaggi: 20
Iscritto il: venerdì 17 luglio 2020, 17:01
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Epoche di interesse: IV

Re: My Italy

Messaggio da Viktor »

Hello all,

@ Maurizio:
I live close to Nuremberg in Bavaria.

@ all:
It would be great, if you will help me with following issue.
In parallel to my work on model railroad layout I try to understand the signalling system at FS. As later on I will have to implement signals and I will have to think about how to switch them with my software (traincontroller). But first of all I need to understant the reality.
Therefore I created the following pictures. This are the situations I will have on my railroad. Hopefully they are self-explanatory.
Immagine
Immagine
Immagine
Immagine
Do I have the right understanding?

I found this supplier for signals. Do you use those signals?
https://www.fermodellismo.it/pcita/shop ... erca&rg=48
Thanh you for your help!

Best Regards,
Viktor
Avatar utente
mazy
Manovratore
Manovratore
Messaggi: 593
Iscritto il: domenica 31 gennaio 2010, 21:43
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Epoche di interesse: II - X
Località: Arnoldstein

Re: My Italy

Messaggio da mazy »

Hi I can see only one signal with wrong aspect: arriving on track 1 the first signal must be yellow NOT blinking
Lorenzo 1' Agente RCCI (ex Inrail - Nord Cargo - RTC)
E 626 e Gr 746 le loco più belle che ci siano..
Elmeon
Deviatore
Deviatore
Messaggi: 216
Iscritto il: domenica 31 luglio 2011, 14:16
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Interesse per i treni: Italiani e stranieri
Località: Origgio (VA)
Contatta:

Re: My Italy

Messaggio da Elmeon »

There is an error also in the transit on track 2, you can't do a transit like that; the correct colours from left to right are yellow/green, red/yellow, then red until the train is completely on track 2, then green
Federico - Elmeon

Le mie foto su Flickr!
Viktor
Ausiliario di Stazione
Ausiliario di Stazione
Messaggi: 20
Iscritto il: venerdì 17 luglio 2020, 17:01
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Epoche di interesse: IV

Re: My Italy

Messaggio da Viktor »

Hello together,

@ mazy: Thank you for your input! I will resprct it. (Even if I would have liked a binking signal :mrgreen: )

@ Elmeon: Also thank you for your feedback! One additional question to your comment: Must the train really stop (V = 0 km/h) before green ascect can be shown, or is is ok when the last turnout is free and train is still rolling? And may be you can explain WHY ascect is not allowed to show green from beginning? (In Germany there are also tracks that can only be used for arriving or leaving, not for transit. On those tracks you must stop first (v = 0 km/h), and then you can go on with green ascect. Because of circuit in signal box.)

Thank you for additional feedback upfront! It really helps me a lot!!!

Bye
Viktor
Avatar utente
Maurizio Melis
Manovratore
Manovratore
Messaggi: 499
Iscritto il: giovedì 1 ottobre 2009, 15:26
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Epoche di interesse: 4
Località: Roma (serafico)

Re: My Italy

Messaggio da Maurizio Melis »

Hallo,
normally you do not have a transit on the diverging route of a point, so normally you transit on track 3.
This is due to the 30kph limit on the diverging route (some more modern points (2000 and later) in stations have 60kph).
Therefore track 2 should normally be used for meets and not for transit.
Ciao
Maurizio Melis
Elmeon
Deviatore
Deviatore
Messaggi: 216
Iscritto il: domenica 31 luglio 2011, 14:16
Interesse per i treni reali: Si
Interesse per i treni in modello: Si
Interesse per i treni: Italiani e stranieri
Località: Origgio (VA)
Contatta:

Re: My Italy

Messaggio da Elmeon »

Viktor ha scritto: @ Elmeon: Also thank you for your feedback! One additional question to your comment: Must the train really stop (V = 0 km/h) before green ascect can be shown, or is is ok when the last turnout is free and train is still rolling? And may be you can explain WHY ascect is not allowed to show green from beginning? (In Germany there are also tracks that can only be used for arriving or leaving, not for transit. On those tracks you must stop first (v = 0 km/h), and then you can go on with green ascect. Because of circuit in signal box.)
Hello Viktor, usually the train have to free the last turnout and be in the track circuit of the platform to have a green aspect at the departing signal; so it's possibile to have a train still rolling but fully on track 2 before having the green at the signal!
Federico - Elmeon

Le mie foto su Flickr!
Rispondi

Torna a “Elaborazioni modellistiche in Scala H0 e N”